Hey,
I will probably be on the event "mad metal machines volume IV". Its two weeks after my "test exams" and about a month before my real exams. So if i am alowed from my parents i will be there for some fun. It will be the first fights for Hyperion en hopefully not the last.
After some electronic ajustments the robot is mutch easyer to controll. Now I can even drive in a strate line that was inpossible a week ago. There wil also be a change in the gearboxes. Instaid of 12mm bronze bushess i will use normall bearing. I will also change the 80 teeth m0.5 gear on the wheels for some bigger gears. The motorgear wil become a 10teeth gear instaid of 12. So that i have some more pushingpower and not speed. Probably still inough.
I also started on the armoure. I began an making the whole "outside" of the robot from clay. When that is finished i will cast plaster around it. When its dry i will take the clay out and sanding the plaster. I will drill couple of holes in the plaster and I will connect a facuempump on them. Then i will use a 3-6mm lexan, depending on if the whole idee works, and make that very hot so that i can bend it easely. I will put it over the plaster and hope while sucking facuem it will take the shape of my robot. Heating it all the time. I hope this will work. And if it does my robot will get a very nice paintjob becaus one of my friends is specialised in painting lexan body's for remotecontrol cars. And loves to paint my "armour"