Diese lila Dinger hier:
https://www.flsbattlebots.cz/en/obchod/comp…-motor-am32-40aAber Achtung, die gibt es als Version mit eingebautem BEC und ohne. Die Version mit ist natürlich etwas dicker und schwerer.
Edit: Laut Bild müsste es beim Link die Version mit BEC sein.
Yes, it is the version with integrated BEC = bigger and heavier. Unfortunately I dont have english description of all products yet. You can always check the czech page and translate it.
I have tested these ESCs and they seem to work very well. I installed them in one of my robots, and it successfully made it through a tournament in Pilsen without any issues.
If you're interested in the ESCs and don't want to go through the manufacturing and flashing process yourself, you can purchase them directly from my e-shop:
Haha! I am looking forward to new shuffler matchups. Maybe I will finally drive Shuffleshock again to make it more difficult for you :p
See you in Karlsbad, we will have registration via our new app that is in development so be patient, it might take some time to fine tune it and put in full use. If you are curious you can check it out and test current functions - CCRL - Tschechischen Kampfroboterliga.
Hello, this might be relevant, I met during a Maker Faire a lady which does t-shirt printing at home. Last week we received our team t-shirts from her. The price for print is 10€ per piece + t-shirt of your choice (4-5€). She can do any amount you like. In case of interest, just let me know.
Good to see that the lifter is ready for action again
The event was a big success. We inspired many new builders, some of them even confirmed that they will participate on the next tournament (11.10.2025 in České Budějovice). There was also a big interest about workshops, where the children could learn how to build robots and parents were interested where to buy affordable parts. This inspired us and we are currently working on our czech roboteer website - FLS Battlebots, where we are even planning an e-shop in the future. Attached you can see some pictures from the tournament.
Big thanks to Reiner for providing the arena for the tournament.
We will try to interest as many new builders as possible to start a robot community in Czech Republic.
Don't worry, the Maker Faire is interested in cooperating with me and host tournaments during every festival so there will be more chances to participate 
Last chance! Registration ends on Wednesday midnight (7.5.)
It's official! First combat robot tournament in Czech Republic (as far as I know).
Date: 10. - 11.5.2025
Place: Prague
Category: Antweight
Registration: https://forms.gle/AFgVGNqLJH3Yu9YS8
Rules: adapted GRA rules
More information here: https://make-more.notion.site/Maker-Faire-Pr…7ecfa4bf5bd75e2
Depending on the number of the registered bots, there should be up to 10 rounds and there will be branded tools from sponsors in the prize pool.
Thank you for creating this thread.
As mentioned above, the tournament will be held on 10th and 11th May in Prague. It will be only antweight competition, similar to one in Nürnberg last October. Expected start will be on Saturday 9am with tech check and from 10am we could start with first round. There will be probably 3-4 rounds each day so bring enough spares. If it is possible, the arena will be set the same way as in Bochum on second day - just a small opening into the hole on each side. We will follow GRA rules.
Registration and more detailed information should hopefully come during following days.
technically smallest possible laserable diameter is 0.8*material thickness.
Why is that? The heat becomes too concentrated and starts to melt the material?
Would the new shape in picture help?
Hello, sorry for interupting this thread but I have a question related to the last few posts. I am currently planning to have a laser cut weapon for my bettleweight robot for the first time. The thickness is 12mm and there are 4mm holes designed in it. Is it possible to manufacture or I will need to redesign the shape similar to Jalapeno's weapon?
From my experience with Olivia, I do not recommend a drill. Drilling requires higher torque and less speed than saw blade and also you need to apply pressure from above for the drill to catch in the material which is difficult with weak servos. But it looks cool and it is ideal for fun fights 
To
Der kleine Kerl ist echt schnell und ich musste erst lernen die Geschwindigkeit zu kontrollieren und vor allem im richtigen Moment vom Gas zu gehen. Vielleicht muss ich mich auch nochmal mit der Einstellung der Fernsteuerung auseinandersetzten. Hat da jemand Typs was man an der FlySky tun kann?
You could try to setup exponential rates. It can help you gain more sensitivity but still maintain your full speed potential.
Borrow is no problem, i switched to Malenkis in all bots recently and have 3 of those receivers packed for an old drivetrain im gonna use in case the Malenki on the pusher breaks down.
Borrowing would be perfect! After the tournament I will desolder it and return to you as new. Can I count with you?
Someone here mentioned buing them from Amazon, unfortunately there is no Amazon in my country and it takes long time to deliver here.
Also I have kind of managed to get my ESP module running so I could control my bot through wifi if there was no other solution.
Hello,
does anyone have a spare receiver FlySky FS2A that could borrow/sell me at the tournament?
I burned 2 of them during building and now I don't have enough receivers to control all my bots.
