Suchergebnisse

Suchergebnisse 1-20 von insgesamt 384.

  • Babeth, Edith and me will be in Moscow, hopefully with Kashei to make the Feathers more fun.

  • Balancing a disk was agas ago for me. 3 employers ago I had acces to a big machine that did the calculations for me. Later on, the superb desings of Flex and Kos were inherently balanced. It's one of the reasons we go for a monoblock disk whenever possible.

  • Team RCC's Raptors.

    maddox - - All Stars Gallerie - Raptoren

    Beitrag

    Theoreticaly, the disk runs around 4500rpm.

  • Team RCC's Raptors.

    maddox - - All Stars Gallerie - Raptoren

    Beitrag

    The scoop is hardox. The 2 supports/connecting plates are 15Mo3 boilersteel. This to avoid drilling in hardox. All is TIG welded together with 307 rod. How it works. The 2 support plates fit in the cutouts, and the M8 bolts clamp the 2 together trough holes in the solid HDPE

  • Team RCC's Raptors.

    maddox - - All Stars Gallerie - Raptoren

    Beitrag

    Perun The classic. Stats 5.7 kg Drive Gimson GR02's with 12V Chinesium brushed motors, controller IBF 4.5. Weapon. Hardox scoop. Battery Turnigy A-Spec 3S 2200mAh Frame. Non. Armor, up to 40mm HDPE

  • Team RCC's Raptors.

    maddox - - All Stars Gallerie - Raptoren

    Beitrag

    Just to split it up from the Original Team RCC Featherweight thread. Leo and me worked on Nebelwerfer last weekend, and it works. Main difference with the previous versions is the size and weight of the disk. Smaller and a tad lighter. Stats. 5Kg Drive, Ranglebox Neptune mated to HK 2836 motors. Controllers, SimonK reflashed Afro 30A. Weapon. TP3620 motor, 210mm diameter 1 kg hardox 500 disk. 2 stage gearing. First stage bevel gear 2.5-1, second stage timing belt with smooth pulley on the disk, …

  • Team RCC robotter.

    maddox - - All Stars Gallerie - Featherweights

    Beitrag

    Better than new we hope. Those corner reinforcements are probably needed as the spinners won't stop improving. Kashei is also back to the living, and stand ready for Ghent. Nebelwerfer. We had a freak lightning storm, and we can sayk, Its Alive... ALIVE. That monster won't be pretty, and with the smallest disk yet.

  • Team RCC robotter.

    maddox - - All Stars Gallerie - Featherweights

    Beitrag

    forum.roboteers.org/index.php?…a9a287458126372fc5c9dffee

  • Team RCC robotter.

    maddox - - All Stars Gallerie - Featherweights

    Beitrag

    Today Leo and me took Hannibalito from Life Support and did some cosmetic surgery. First idea was to rebuild the armor completely. But after checking the damage, it wasn't that bad. Just the 2 front corners that were deeply scratched. It just looked horrible before cleaning. So we smoothed out the damage, and grafted some new 12mm HDPE over the deep scratches. For good measure and improvement, an experiment with bend Hardox was done and now Hannibalito has a moustache. A new flipperarm was made,…

  • Thanks Reiner, to change the fuseholder on Peruns ESC. In the mean time, Hannibalito is on life support after the gruesome beating it recieved. But he will recover. The good news. - The frame and frontal hardox plate and drives are in good shape. - The ram was ripped lose from the mounting bolts, but that's already repaired, with improvements. The bad news. - Buffertank and connecting tubes are ripped appart. - 12mm HDPE armor ain't enough anymore.

  • Perun ain't that powerhungry. The 30A will do nicely.

  • After the last MMM and a "DRG clubday", Kashei, Hannibalito and Perun got some TLC. Hannibalito. A small but persistent leak between main bottle and buffertank became a large leak. A new buffertank and some changes in piping. Problem solved. Fitted with a 40A fuse and drives that have every bolt Loctite'd it looks that the issue with failing drive is gone. Kashei. Except a lot of lose bolts and some wear and tear on the weapongears mechanical nothing special to report. Loctite applied and let se…

  • Using 2K glue to hold the magnets to the can, and more 2K glue to hold the windings to the central hub. In short, potting the NTM 5060. That's all.

  • Does that disk have a welded in tooth? If so, that's not balanced at the moment.

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    It was the probably that did it. Still for sale...

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    Bid of £1500. Probably sold.

  • Spring clearing

    maddox - - Robot-Flohmarkt

    Beitrag

    Spectrum DX6 and recievers sold. Quanum setup, sold. More goodies available One fat brushless ESC, Alienpower Sport 180 JET 2-7S . 1 Propdrive 28-36 750 KV(Z12 mod 1 pinion) with Trackstar 60A V2 ESC

  • If you can, weld it. The less bolts used, the stronger the whole will be. But if you want to use bolts. The more the merrier.

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    We're going to add the Transmitter, just to make it easier for the new owner to get started.

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    First offer is in £1250 fom the UK forum.