Suchergebnisse

Suchergebnisse 1-20 von insgesamt 374.

  • Perun ain't that powerhungry. The 30A will do nicely.

  • After the last MMM and a "DRG clubday", Kashei, Hannibalito and Perun got some TLC. Hannibalito. A small but persistent leak between main bottle and buffertank became a large leak. A new buffertank and some changes in piping. Problem solved. Fitted with a 40A fuse and drives that have every bolt Loctite'd it looks that the issue with failing drive is gone. Kashei. Except a lot of lose bolts and some wear and tear on the weapongears mechanical nothing special to report. Loctite applied and let se…

  • Using 2K glue to hold the magnets to the can, and more 2K glue to hold the windings to the central hub. In short, potting the NTM 5060. That's all.

  • Does that disk have a welded in tooth? If so, that's not balanced at the moment.

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    It was the probably that did it. Still for sale...

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    Bid of £1500. Probably sold.

  • Spring clearing

    maddox - - Robot-Flohmarkt

    Beitrag

    Spectrum DX6 and recievers sold. Quanum setup, sold. More goodies available One fat brushless ESC, Alienpower Sport 180 JET 2-7S . 1 Propdrive 28-36 750 KV(Z12 mod 1 pinion) with Trackstar 60A V2 ESC

  • If you can, weld it. The less bolts used, the stronger the whole will be. But if you want to use bolts. The more the merrier.

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    We're going to add the Transmitter, just to make it easier for the new owner to get started.

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    First offer is in £1250 fom the UK forum.

  • Bullfrog

    maddox - - Robot-Flohmarkt

    Beitrag

    After deliberation , Team RCC is going to sell Bullfrog. It comes with 2 2 kg CO2 bottles , Hex 17 nut replacing the screw valve. 2 sets of 2x5S 8000mAh LiPo batteries Fast overview. Electronics: Sidewinder ESC.(BEC disabled, seperate 5A BEC is doing that job) Flysky reciever (no transmitter) Alex Battleswitch (Austrian quality solid state 2 port switch) Drive, Iskra 24V 1.2Kw motors, 20-1 gearratio , 250mm solid foam wheels (came from Team Plumbcrazy/Sewersnake). Hardox 450 shell. All TIG welde…

  • Spring clearing

    maddox - - Robot-Flohmarkt

    Beitrag

    And adding a handfull of HK 3650 and 2858 inrunners to the mix.

  • Spring clearing

    maddox - - Robot-Flohmarkt

    Beitrag

    A first result of the spring cleaning. Now available 1 Spectrum DX6 + 5 BR6000 recievers. 1 Turnigy G60 500 KV outrunner 1 Quanum Telemetry reciever + 2 transmitters. Handfull 25A en 60A Trackstar ESC's. 1 HK 150A car ESC + programmingbox. 2 Gimson GR02's with secundary bearing , Hex 17 uptake (RC wheels fit directly on those) and HK 2836 brushless inrunner 2800KV motors, as used in Nebelwerfer 2

  • I wouldn't accept a cast iron brake disk as a base for a spinner. Especialy with a welded in tooth. Even using 307 welding rod. But lets see what happens. In an controlled enviroment like an arena and a 50-110 kg concrete or steel victim, Maybe I'm completely wrong in my assumptions based on experience.

  • If you want high power applications for feathers, the Ranglebox Saturns are your aim. The gearboxes use module 0.6 gears, and are ready to accept most 540-775 size motors as wel most suitable size of brushless motors. I don't believe those pins will work lose. (never seen a sheared pin, only worked lose)

  • The Ranglebox Neptunes and Saturns do have only steel gears. (as well the older Gimson GR01 and 02's, or the more expensive Robot Power Magnum) The failures I have seen: - The planet carrier, as the pins can work lose. - Shock damage to the motors, cracking magnets. We did build own drivetrains with single or double stage reductions. But those were invariably bigger, heavier and more expensive for the same results.

  • Brushless für Spinner

    maddox - - Waffensysteme

    Beitrag

    youtube.com/watch?v=F5zaSVxwDTI

  • Waffenmaterial/Torsion

    maddox - - Waffensysteme

    Beitrag

    Any spinner build by me runs on bronze or whitemetal bushings. I believe those machines have earned some credibility.

  • Waffenmaterial/Torsion

    maddox - - Waffensysteme

    Beitrag

    We're using 2 45x5x360 HDPE sheets as a double leafspring to mount the drives in our featherweights. facebook.com/photo.php?fbid=10….587733880&type=3&theater

  • I'm not dictating what you should run Battlecore. I just give examples and some practical information.